計量標準報告 Vol.3

Tunable double-sapphire-loaded microwave cavity with high-Q factor

Heterodyne Fourier transform spectrometer for the near-infrared region

Development of nanometrological, dimensional standards in NMIJ

Simple method for reducing the nonlinearity of a homodyne interferometer with a quadrature detector system

Experimental study on the uncertainty in static calibration of a torque measuring device
1st report: -Verification of repeatability, reproducibility and zero error-

Experimental study on the uncertainty in static calibration of a torque measuring device
2st report: -Verification of interpolation error, reversibility and resolution-

Calibration of charge amplifier on vibration acceleration standard

Long-term stability repeatability of charpy impact test estimated in the international comparisons

Uncertainty analyses of reference specimens for the verification of charpy impact test machines

Platinum-Sheathed High-Temperature Platinum Resistance Thermometers for Use up to 1200 ℃

Measurement of the Insulation Resistance for the Development of High Temperature Platinum Resistance
Thermometers with a Guard Electrode

Properties of a High-Temperature Platinum Resistance Thermometer up to 1350 ℃

Species-specific Isotope Dilution Analysis of Mono-,Di, and Tri-butyltin Compounds in Sediment
Using Gas Chromatography-Inductively Coupled Plasma Mass Spectrometry with Synthesized ¹¹⁸

Microwave-Assisted Steam Distillation for Simple Determination of Polychlorinated Biphenyls and Organochlorine Pesticides in Sediments

Development and evaluation of reaction gas chromatograph as a calibration method using an index compound

Evaluation of the Quantitativeness of Matrix Assisted Laser Desorption/Ionization Time-of-flight
Mass Spectrometry Using an Equimolar Mixture of Uniform Poly(ethylene Glycol) Oligomers

Uncertainties caused by surface adsorbates in estimates of the thickness of SiO₂ ultrathin films

Survey on the utilization of virtual private network technologies for the data acquisition in remote calibration

Uncertainty from a viewpoint of type approval verification

A survey on precise measurements and database for fluid properties

Establishment of methods for flowrate measurement and flowmeter characteristic test for regulation of automotive exhaust emission

A survey on EMI measurement and wide band antenna standards

A survey on inorganic standard solution for rare earth elements and precious metals

Development and evaluation of new sensitive coaxial-cylinder rotational viscometer

A survey on low differential pressure standard using pressure balances

A survey on the uncertainty in the realization of ITS-90 metal fixed points due to impurities

Survey of calibration method on standard leaks

An analysis on the uncertainty of calculating the time constant of the quadrifilar reversed resistor

Broad-spectrum frequency comb generation and carrier-envelope offset frequency measurement by second-harmonic generation of a mode-locked fiber laser

Absolute frequency measurement of an acetylene-stabilized laser at 1542 nm

Frequency measurements and hyperfine structure of the R(85)33-0 transition of molecular iodine with a femtosecond optical comb

Removing nonlinearity of a homodyne interferometer by adjusting the gains of its quadrature detector systems

Measurement of the volume of weights using an acoustic volumeter and the reliability of such measurement

Realization of the triple points of Ar and e-H2 at NMIJ/AIST

Interpolating gas thermometer for realizing the ITS-90 at NMIJ/AIST

New sealed cells for realization of cryogenic fixed points at NMIJ/AIST

On the effect of impurities on the melting curve of the eutectic system Fe-C

Investigation of fixed points exceeding 2500 ℃ using metal carbide-carbon eutectics

Realizing the high-temperature part of a future ITS with the aid of eutectic metal-carbon fixed points

Effects of heat treatment on the inhomogeneity of the Pt/Pd thermocouple at the Cu freezing point

Low-temperature infrared radiation thermometry at NMIJ

A fourier-transform spectrometer for accurate thermometric applications at low temperatures

High-temperature furnace systems for realizing metal-carbon eutectic fixed points

DC voltage ratio self-calibration by build-up method using reference voltages of 10 V and 100 V

Surface evolution of nanostructured CrN and Si3N4 films

Carbon nitride thin films prepared by radio-frequency magnetron sputtering combined with a nitrogen radical beam source

FTIR-ATR evaluation of organic contaminant cleaning methods for SiO2 surfaces

What is the weighing form in gravimetric determination of antimony(III) with oxine?

Need and problems of acoustic standard for airborne ultrasound

International comparison, APMP.QM-K4, final report 17 July 2002

Bilateral comparison of pressure sensitivities of laboratory standard microphones between NMIJ and NIMT

Development of an Intensity Stabilized Laser System with Frequency Offset of 9.2GHz

Pitch Measurement of 150 nm 1D-grating Standards Using an Nano-metrological Atomic Force Microscope

Rubidium-stabilized diode laser for high-precision interferometer

Thermal Conductivity and Thermal Diffusivity of Twenty-Nine Liquids: Alkenes, Cyclic (Alkanes, Alkenes, Alkadienes, Aromatics), and Deuterated Hydrocarbons

Hardening Mechanisms of Amorphous / Polycrystalline Nanostructured Multilayer Films: Si₃N₄/CrN and Si₃N₄/TiN

What happens in the annealing of carbon nitride thin films?

Nanoscale structural change in a sputter-deposited SiO₂/a-Si/SiO₂ sandwich

Suppression of interfacial diffusion by a predeposited Hf metal layer on SO₂/Si

A Survey on Time/Frequency Transfer and Dissemination Techniques Using Optical Fiber

A survey on micro metrology for dimensional standard

A survey of a power uprate in a commercial nuclear power plant and a water flow facility for calibration standard

Review of Alternating Current Ratio Standards

Recent progress and future prospects for highly accurate measurement methods in millimeter-wave antenna standards

A survey on RF attenuation standand

A survey of RF & microwave impedance standands

A survey on development and establishment of absorbed dose standands for beta radiaton

A survey on highly sensitive gas analysis for standard gas preparation

A Survey on Measurement Technique to Establish and Supply pH Primary Standard

A survey on speciation reference materials

A Survey on Thickness Measurements and Standards for Ultra-thin Films