Research Center for aaaaaaaaaaaaaaa
breadcrumb navigation> Organization > NMIJ > Research Institute for Engineering Measurement > Force and Torque Standards Group > Research results

Oral Presentation

Our oral presentation at conferences, workshops, and other meetings are listed below.
2021 >>  2020 >>  2019 >>  2018 >>  2017 >>  2016 >>  2015 >>  2014 >>  2013 >>  2012 >>  2011 >>  2010 >>  2009 >>  2007 >>

Oral Presentation 2021

Date 30 Sep. 2021
Title Development of a Magnetic Measurement System by Zeeman Effect Using a Cesium Vapor Cell
Authors Atsuhiro Nishino, Moto Kinoshita
Meeting 38th Sensing forum of SICE, Online
Host The Society of Instrument and Control Engineers of Japan (SICE)
Date 30 Sep. 2021
Title Evaluation of piezoresistive force transducer by electromagnetic force type microforce generating machine
Authors Junfang Zhu, Toshiyuki Hayashi, Koji Ogushi
Meeting 38th Sensing forum of SICE, Online
Host The Society of Instrument and Control Engineers of Japan (SICE)
Date 10 Sep. 2021
Title Installation of Transducer-Identification Function into Existing Indicators toward Remote Calibration of Force Calibration Machines
Authors Hayashi Toshiyuki, Shibano Youichi
Meeting 60th Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE), Online
Host The Society of Instrument and Control Engineers of Japan (SICE)
Date 30 Aug. 2021
Title The testing evaluation of digital torque screwdrivers by using a torque screwdriver tester
Authors Koji Ogushi
Meeting The IMEKO XXIII World congress (IMEKO2021), Online
Host Science Council of Japan (SCJ) and the Society of Instrument and Control Engineers of Japan (SICE)
Date 30 Aug. 2021
Title Design of a Newton’s constant G measurement system using a torque generation machine based on the principle of Kibble balance
Authors Atsuhiro Nishino
Meeting The IMEKO XXIII World congress (IMEKO2021), Online
Host Science Council of Japan (SCJ) and the Society of Instrument and Control Engineers of Japan (SICE)
Date 30 Aug. 2021
Title Electrification of NMIJ'S 540 kN dead-weight type force standard machine
Authors Hayashi Toshiyuki, Zhu Junfang
Meeting The IMEKO XXIII World congress (IMEKO2021), Online
Host Science Council of Japan (SCJ) and the Society of Instrument and Control Engineers of Japan (SICE)
Date 30 Aug. 2021
Title Temperature dependence for improving the accuracy of an electromagnetic microforce generating machine
Authors Junfang Zhu, Toshiyuki Hayashi, Koji Ogushi
Meeting The IMEKO XXIII World congress (IMEKO2021), Online
Host Science Council of Japan (SCJ) and the Society of Instrument and Control Engineers of Japan (SICE)
Date 30 Aug. 2021
Title Design of a new dynamic torque generation machine based on the principle of Kibble balance
Authors Misaki Hamaji, Atsuhiro Nishino, Koji Ogushi
Meeting The IMEKO XXIII World congress (IMEKO2021), Online
Host Science Council of Japan (SCJ) and the Society of Instrument and Control Engineers of Japan (SICE)

Oral Presentation 2020

Date 26 Sep. 2020
Title Influence of Counterweight-Loading on Calibration Result of Reference Torque Wrench Using Deadweight Type Torque Calibration Equipment
Authors Koji Ogushi
Meeting SICE Annual Conference 2020 (SICE 2020), Online
Host The Society of Instrument and Control Engineers of Japan (SICE)
Date 3 Sep. 2020
Title The Investigation of Testing Results for High Accurate Hand Torque Wrenches with Securing the Traceability of Measurement
Authors Koji Ogushi
Meeting 37th Sensing forum of SICE, Online
Host The Society of Instrument and Control Engineers of Japan (SICE)
Date 12 Jun. 2020
Title The Evaluation Results for Setting Torque Screwdrivers below the Range of 100 cN·m
Authors Koji Ogushi
Meeting Joint Symposium on the Organic Micro-Analysis
Host The Association of Organic Micro-Analysis

Oral Presentation 2019

Date 2 Dec. 2019
Title Report of Asia Pacific Measurement Forum on Mechanical Quantities (APMF 2019)
Authors Koji Ogushi, Atsuhiro Nishino
Meeting APMP 2019- The 35th Asia Pacific Metrology Programme General Assembly and Related Activities, Sydney, Australia
Host National Measurement Institute, Australia
Date 2 Dec. 2019
Title Research Topics of Mass and Related Quantities in NMIJ, Part 1
Authors Koji Ogushi, Naoki Kuramoto, Yoshitaka Fujita, Kenta Arai, Koichiro Hattori
Meeting APMP 2019- The 35th Asia Pacific Metrology Programme General Assembly and Related Activities, Sydney, Australia
Host National Measurement Institute, Australia
Date 2 Dec. 2019
Title Research Topics of Mass and Related Quantities in NMIJ, Part 2
Authors Kenta Arai, Koji Ogushi, Yoshitaka Fujita, Naoki Kuramoto, Koichiro Hattori
Meeting APMP 2019- The 35th Asia Pacific Metrology Programme General Assembly and Related Activities, Sydney, Australia
Host National Measurement Institute, Australia
Date 18 Nov. 2019
Title Evaluation of Small Capacity Force Transducers
Authors Junfang Zhu, Toshiyuki Hayashi, Koji Ogushi
Meeting Asia Pacific Measurement Forum on Mechanical Quantities, 2019 (APMF 2019), Niigata, Japan
Host  
Date 20 Nov. 2019
Title Development of a low nominal capacity reference torque calibration machine
Authors Atsuhiro Nishino, Misaki Kiuchi, Koji Ogushi
Meeting Asia Pacific Measurement Forum on Mechanical Quantities, 2019 (APMF 2019), Niigata, Japan
Host  
Date 20 Nov. 2019
Title Renovation of NMIJ's 20 MN Hydraulic Amplification Type and 1 MN Lever Amplification Type Force Standard Machines
Authors Toshiyuki Hayashi, Hiroshi Maejima, Junfang Zhu, Kazunaga Ueda, Hiroshi Otani
Meeting Asia Pacific Measurement Forum on Mechanical Quantities, 2019 (APMF 2019), Niigata, Japan
Host  
Date 20 Nov. 2019
Title Calibration of Torque Measuring Devices Using the Reference Type Torque Calibration Machine in JQA
Authors Yusuke Toda, Takahiro Kurokawa, Hiroki Teshigawara, Koji Ogushi
Meeting Asia Pacific Measurement Forum on Mechanical Quantities, 2019 (APMF 2019), Niigata, Japan
Host  
Date 30 Aug. 2019
Title Evaluation of the traveling standards for the key-comparison in the range of 500 N (in Japanese)
Authors Toshiyuki Hayashi, Hiroshi Maejima, Junfang Zhu
Meeting 36th Sensing forum of SICE, Yokohama, Japan
Host  
Date 30 Aug. 2019
Title Influence of retention times on calibration uncertainty of force measuring instruments according to ASTM E74 (in Japanese)
Authors Hiroshi Maejima, Toshiyuki Hayashi, Junfang Zhu
Meeting 36th Sensing forum of SICE, Yokohama, Japan
Host  
Date 30 Aug. 2019
Title Fulcrum sensitivity of balance mechanism in small capacity dead-weight type force standard machine (in Japanese)
Authors Junfang Zhu, Toshiyuki Hayashi, Atsuhiro Nishino and Koji Ogushi
Meeting 36th Sensing forum of SICE, Yokohama, Japan
Host  
Date 30 Aug. 2019
Title Development of a reference torque calibration machine (in Japanese)
Authors Atsuhiro Nishino
Meeting 36th Sensing forum of SICE, Yokohama, Japan
Host  
Date 30 Aug. 2019
Title The Evaluation of Testing Results for Setting Torque Screwdrivers by using a Torque Screwdriver Tester (in Japanese)
Authors Koji Ogushi
Meeting 36th Sensing forum of SICE, Yokohama, Japan
Host  

Oral Presentation 2018

Date 4 Sep. 2018
Title Influence of Rotational Mounting Conditions on Calibration Results and those Uncertainties in Reference Torque Wrenches
Authors Koji Ogushi
Meeting XXII World Congress of the International Measurement Confederation (IMEKO), Belfast, UK
Host  
Date 31 Aug. 2018
Title Development of a high accuracy rotational positioning control system in an electromagnetic force type torque standard machine (in Japanese)
Authors Atsuhiro Nishino
Meeting 35th Sensing forum of SICE, Yamaguchi, Japan
Host  
Date 31 Aug. 2018
Title The Evaluation of Testing Results for Digital Torque Wrenches by using a Torque Wrench Tester (in Japanese)
Authors Koji Ogushi
Meeting 35th Sensing forum of SICE, Yamaguchi, Japan
Host  
Date 31 Aug. 2018
Title Development of a balancing mechanism for a small capacity dead-weight type force standard machine (in Japanese)
Authors Junfang Zhu, Toshiyuki Hayashi, Atsuhiro Nishino and Koji Ogushi
Meeting 35th Sensing forum of SICE, Yamaguchi, Japan
Host  

Oral Presentation 2017

Date 27 Nov. 2017
Title Brief introduction of recent APMP supplemental comparisons of force
Authors Toshiyuki Hayashi, Kazunaga Ueda, Hiroshi Maejima, Koji Ogushi
Meeting APMP 2017- The 33rd Asia Pacific Metrology Programme General Assembly and Related Activities, Delhi, India
Host National Physical Laboratory, India
Date 20 Nov. 2017
Title Re-evaluation of a relative expanded uncertainty of torque realized by a 10 N·m deadweight torque standard machine
Authors Atsuhiro Nishino, Koji Ogushi
Meeting Asia-Pacific Symposium on Measurement of Mass, Force & Torque (APMF 2017) Krabi, Thailand
Host  
Date 20 Nov. 2017
Title Transverse force effect due to the counter weight loading for the calibration of reference torque wrenches using deadweight type torque standard machines
Authors Koji Ogushi
Meeting Asia-Pacific Symposium on Measurement of Mass, Force & Torque (APMF 2017) Krabi, Thailand
Host  
Date 20-21 Nov. 2017
Title Bilateral comparison of 500 kN force at 1 MN deadweight standard machine between NMIJ and KRISS
Authors Jin-Seok Jang, Min-Seok Kim, Jeon-Tae Lee, Ho-Young Lee, Yon-Kyu Park, and Toshiyuki Hayashi
Meeting Asia-Pacific Symposium on Measurement of Mass, Force & Torque (APMF 2017) Krabi, Thailand
Host  
Date 22 Sep. 2017
Title Re-evaluation of sensitivity limit in a 10 N·m deadweight torque standard machine
Authors Atsuhiro Nishino and Koji Ogushi
Meeting SICE Annual Conference 2017, Kanazawa, Japan
Host  
Date 31 Aug. 2017
Title The Influence of Face Contact of Square Drives on the Calibration Results for Reference Torque Wrenches (in Japanese)
Authors Koji Ogushi
Meeting 34th Sensing forum of SICE, Kumamoto, Japan
Host  
Date 31 Aug. 2017
Title A calibration method of a torque measuring device by using an electromagnetic force type torque standard machine according to JMIF015 (TTSG-T102) (in Japanese)
Authors Atsuhiro Nishino, Koji Ogushi and Kenichi Fujii
Meeting 34th Sensing forum of SICE, Kumamoto, Japan
Host  
Date 31 Aug. 2017
Title Influence of loading orders on calibration uncertainty of force measuring instruments according to ASTM E74 (in Japanese)
Authors Hiroshi Maejima, Toshiyuki Hayashi, Kazunaga Ueda
Meeting 34th Sensing forum of SICE, Kumamoto, Japan
Host  
Date 1 Jun. 2017
Title Influence Of Changing Way Of The Rotational Mounting Position On Calibration Results Of Reference Torque Wrenches
Authors Koji Ogushi
Meeting IMEKO TC3, TC5 and TC22 International Conference 2017, Helsinki, Finland
Host IMEKO
Date 1 Jun. 2017
Title Realization of a Microtorque Standard by Using an Electromagnetic Force Type Torque Standard Machine
Authors Atsuhiro Nishino
Meeting IMEKO TC3, TC5 and TC22 International Conference 2017, Helsinki, Finland
Host IMEKO

Oral Presentation 2016

Date 15 Nov. 2016
Title Final Report on the APMP.M.T-S1 Supplementary Comparison, Measurand Torque: 0 N·m, 1000 N·m, 2000 N·m (bilateral comparison)
Authors Koji Ogushi, Atsuhiro Nishino, Dinar Nurcahyono, Hafid
Meeting APMP 2016 TCM Workshop, Da Nang, Vietnam
Host Vietnam Metrology Institute (VMI)
Date 14 Nov. 2016
Title Activity report of Force and Torque Standards Group
Authors Koji Ogushi, Toshiyuki Hayashi, Atsuhiro Nishino, Hiroshi Maejima, Kazunaga Ueda
Meeting APMP 2016 TCM Workshop, Da Nang, Vietnam
Host Vietnam Metrology Institute (VMI)
Date 22 Sep. 2016
Title A Difference between Calibration Results of a Torque Transducer with the Pure-Torque-Loading and with the Torque-Wrench-Loading
Authors Koji Ogushi
Meeting SICE Annual Conference 2016, Tsukuba, Japan
Host  
Date 22 Sep. 2016
Title Inter-Laboratories Comparison between NMIJ and NIMT for Calibration Capability of a Low Nominal Capacity Torque Measuring Device in the Range from 0.1 N·m to 1 N·m
Authors Atsuhiro Nishino, Koji Ogushi, Tassanai Sanponpute, Nittaya Arksonnarong
Meeting SICE Annual Conference 2016, Tsukuba, Japan
Host  
Date 22 Sep. 2016
Title Experimental Verification of the Evaluation Method of Creep Uncertainty from Reversibility Error Prescribed in ISO 376:2011
Authors Toshiyuki Hayashi, Kazunaga Ueda
Meeting SICE Annual Conference 2016, Tsukuba, Japan
Host  
Date 2 Sep. 2016
Title Development of a new microscopic torque standard machine based on the torque generating method using electromagnetic force (in Japanese)
Authors Atsuhiro Nishino, Kenichi Fujii
Meeting 33rd Sensing forum of SICE, Wakayama, Japan
Host  
Date 2 Sep. 2016
Title Improvement in calibration uncertainties of large rated-capacity force measuring instruments by using a spherical loading platen (in Japanese)
Authors Hiroshi Maejima, Toshiyuki Hayashi, Kazunaga Ueda
Meeting 33rd Sensing forum of SICE, Wakayama, Japan
Host  

Oral Presentation 2015

Date 28 Oct. 2015
Title Intra-laboratory Comparison between Calibration Capabilities of Reference Torque Wrenches using Two Deadweight Torque Standard Machines
Authors Atsuhiro Nishino, Koji Ogushi and Kazunaga Ueda
Meeting Asia-Pacific Symposium on Measurement of Mass, Force & Torque (APMF 2015) Seoul, Korea
Host  
Date 28 Oct. 2015
Title Inter-laboratories Comparison between NMIJ and KRISS for Calibration Capabilities of Torque Measuring Devices in The Range from 50 N·m to 2 kN·m
Authors Koji Ogushi, Atsuhiro Nishino, Kazunaga Ueda, Min-Seok Kim and Yon-Kyu Park
Meeting Asia-Pacific Symposium on Measurement of Mass, Force & Torque (APMF 2015) Seoul, Korea
Host  
Date 10-11 Sep. 2015
Title Development of a Fulcrum for a New Micro-Torque Calibration Equipment (in Japanese).
Authors Atsuhiro NISHINO and Kazunaga UEDA
Meeting 32nd Sensing forum of SICE, Osaka, Japan
Host  
Date 31 Aug. 2015
Title ANOTHER APPROACH ANALYZING THE CROSSTALK MATRIX FOR A PRECISE FORCE-TORQUE TRANSDUCER
Authors Koji Ogushi, Sebastian Baumgarten and Dirk ROESKE
Meeting IMEKO XXI World Congress, Prague
Host  
Date 30 Aug. - 4 Sep. 2015
Title Desing of a New Torque Standard Machine based on the Torque Generating Method using Electromagnetic Force
Authors A.Nishino, K.Ueda and K.Fujii
Meeting XXI IMEKO World Congress, Prague, Czech Republic
Host  
Date 2015
Title Development of a 10 N·m deadweight torque standard machine
Authors A.Nishino, K.Ogushi and K.Ueda
Meeting IMS2015/ESW2015
Host  

Oral Presentation 2014

Date 26 Sep. 2014
Title A proposal for evaluation of dynamic characteristics in torque testing equipment (in Japanese).
Authors Koji Ogushi and Kazunaga Ueda
Meeting 31th Sensing forum of SICE, Saga, Japan
Host  
Date 11 Sep. 2014
Title Evaluation of multi-component force sensor using reference uniaxial force sensors
Authors Toshiyuki Hayashi, Hiroshi Maejima and Kazunaga Ueda
Meeting SICE Annual Conference 2014, Sapporo
Host  
Date 9-12 Sep. 2014
Title Study on a calibration method of small-rated-capacity reference torque wrenches
Authors A. Nishino, K. Ogushi and K. Ueda
Meeting SICE Annual Conference 2014, Hokkaido
Host  
Date 4 Feb. 2014
Title CALIBRATION CHAIN FOR HAND TORQUE SCREWDRIVERS
Authors Koji Ogushi, Atsuhiro Nishino, Koji Maeda and Kazunaga Ueda
Meeting IMEKO 22nd TC3, 15th TC5 and 3rd TC22 International Conferences, Cape Town, Republic of South Africa
Host  

Oral Presentation 2013

Date 20-22 Nov. 2013
Title Development of a New Small-rated-capacity Reference Torque Wrench
Authors A.Nishino, K.Oghushi and K.Ueda
Meeting APMF2013, Taipei, Taiwan
Host  
Date 20 Nov. 2013
Title Renovation of NMIJ's 5 MN Hydraulic Amplification Type Force Standard Machine
Authors Toshiyuki Hayashi, Hiroshi Maejima, Kazunaga Ueda and Koji Aokitsu
Meeting APMF2013, Taipei, Taiwan
Host  
Date 17 Sep. 2013
Title Evaluation of multi-component force sensor using uniaxial testing machine
Authors Toshiyuki Hayashi, Hiroshi Maejima and Kazunaga Ueda
Meeting SICE2013 Annual Conference, Nagoya
Host  

Oral Presentation 2012

Date 27-28 Sep. 2012
Title Intra-laboratory Comparison between Calibration Capabilities of a Torque Measuring Device using Two Deadweight Torque Standard Machines (in Japanese).
Authors Atsuhiro NISHINO, Koji OGUSHI and Kazunaga UEDA
Meeting 29th Sensing forum of SICE, Ibaraki, Japan
Host  
Date 9-12 Sep. 2012
Title Recalibration of the moment arm length of a 10 N·m dead weight torque standard machine and comparison with a 1 kN·m dead weight torque standard machine
Authors A. Nishino, K. Ogushi and K. Ueda
Meeting IMEKO 2012 World Congress, Busan, Republic of Korea
Host  
Date 12 Sep. 2012
Title INTER-LABORATORY COMPARISON OF REFERENCE TORQUE WRENCH CALIBRATION BETWEEN NMIJ AND PTB IN THE RANGE OF FROM 200 N·m TO 2 kN·m
Authors Koji Ogushi, Atsuhiro Nishino, Koji Maeda, Kazunaga Ueda, Andreas Brüge and Dirk Röske
Meeting IMEKO 2012 World Congress, Busan, Republic of Korea
Host  
Date 11 Sep. 2012
Title Renovation of NMIJ's 54 kN Force Standard Machine into 100 kN Dead-Weight Machine
Authors Toshiyuki Hayashi, Yoshihisa Katase, Hiroshi Maejima, Yukio Yamaguchi and Kazunaga Ueda
Meeting IMEKO 2012 World Congress, Busan, Republic of Korea
Host  
Date 22 Aug. 2012
Title Advantages of the calibration chain for hand torque screwdrivers traceable to the national torque standard
Authors Koji Ogushi, Atsuhiro Nishino, Koji Maeda and Kazunaga Ueda
Meeting SICE2012 Annual Conference, Akita
Host  
Date 22 Aug. 2012
Title Improvement of reproducibility in a calibration of tensile force transducers by using low friction rod-end bearings
Authors Toshiyuki Hayashi, Hiroshi Maejima and Kazunaga Ueda
Meeting SICE2012 Annual Conference, Akita
Host  

Oral Presentation 2011

Date 13-14 Oct. 2011
Title An Overload Protective Device for a 10 N·m Dead Weight Torque Standard Machine (in Japanese).
Authors Atsuhiro NISHINO, Koji OGUSHI and Kazunaga UEDA
Meeting 28th Sensing forum of SICE, Tokyo, Japan
Host  
Date 14 Sep. 2011
Title Calibration of a torque wrench tester using a reference torque wrench
Authors Koji Ogushi, Atsuhiro Nishino, Koji Maeda and Kazunaga Ueda
Meeting SICE2011 Annual Conference, Tokyo
Host  
Date 14 Sep. 2011
Title Automatic rotation equipment for tensile force transducers applying to 3 kN deadweight type force standard machine
Authors Toshiyuki Hayashi, Yoshihisa Katase, Hiroshi Maejima, Yukio Yamaguchi and Kazunaga Ueda
Meeting SICE2011 Annual Conference, Tokyo
Host  

Oral Presentation 2010

Date 21-25 Nov. 2010
Title Evaluation of sensitivity limit of a 10 N·m dead weight torque standard machin and stability of a new 1 N·m torque measuring device
Authors A. Nishino, K. Ogushi and K. Ueda
Meeting IMEKO 2010 TC3, TC5 and TC22 Conferences, Pattaya, Thailand
Host  
Date 27-28 Sep. 2010
Title Study on the Waiting Time to Data Acquisition in the Calibration of Torque Measuring Devices by the 10 N·m Dead Weight Torque Standard Machine (in Japanese).
Authors Atsuhiro NISHINO, Koji OGUSHI and Kazunaga UEDA
Meeting 27th Sensing forum of SICE, Gunma, Japan
Host  
Date 28 Sep. 2010
Title Intra-laboratory comparison between calibration capabilities of reference torque wrench using two deadweight torque standard machines (in Japanese).
Authors Koji Ogushi, Atsuhiro Nishino, Koji Maeda and Kazunaga Ueda
Meeting 27th Sensing forum of SICE, Kiryu, Japan
Host  
Date 21 Aug. 2010
Title Variable speed control of hydraulically driven weight stacks in the 540 kN force standard machine
Authors Toshiyuki Hayashi, Yoshihisa Katase, Hiroshi Maejima, Yukio Yamaguchi and Kazunaga Ueda
Meeting SICE2010 Annual Conference, Taipei, Taiwan
Host  

Oral Presentation 2009

Date 6-11 Sep. 2009
Title Sensitivity evaluation of the fulcrum in the 10 Nï½¥m dead weight torque standard machine and performance examination of a 1 Nï½¥m torque measuring device
Authors A.Nishino, K.Ogushi and K.Ueda
Meeting Proc. IMEKO XIX World Congress, CD-ROM, Lisbon, Portugal
Host  
Date 6-11 Sep. 2009
Title Application of a loading frame structure to a force comparator referring to the tuning fork type force transducer
Authors T.Hayashi, Y.Katase, K.Ueda, N,Shinozaki and H.Suzawa
Meeting Proc. IMEKO XIX World Congress, pp.250-254, Lisbon, Portugal
Host  
Date 18-21 Aug. 2009
Title Variable speed control of weight stacks in 3 kN force standard machine
Authors T.Hayashi, Y.Katase, H.Maejima, Y.Yamaguchi and K.Ueda
Meeting Proc. ICCAS-SICE 2009, pp.374-377, Fukuoka, Japan
Host  

Oral Presentation 2008

Date 20-22 Aug. 2008
Title Enabling one step loading operation using linkage-weight system of 20 kN force standard machine
Authors Toshiyuki Hayashi, Yoshihisa Katase, Hiroshi Maejima, Yukio Yamaguchi, Kazunaga Ueda
Meeting Proc. SICE Annual Conference 2008
Host  

Oral Presentation 2007

Date 26-30 Nov. 2007
Title Expansion of the calibration range and improvement of the uncertainty in the 1 kNï½¥m deadweight torque standard machine
Authors K.Ogushi, A.Nishino, T.Ota and K.Ueda
Meeting Proc. IMEKO 20th TC3 & 3rd TC16 & 1st TC22 International Conference, CD-ROM, Merida, Mexico
Host  
Date 17-20 Sep. 2007
Title Improved working efficiency of force standard machine by separating alternative weight stacks
Authors Toshiyuki Hayashi, Yoshihisa Katase, Hiroshi Maejima, Yukio Yamaguchi, Kazunaga Ueda, Yoshiyuki Hikichi
Meeting Proc. SICE Annual Conference 2007
Host  

Oral Presentation 2006

Date 18-21 Oct. 2006
Title An Estimate of Uncertainty Arising from Loading Speed Differences in Calibrations of Force Measuring Devices
Authors Toshiyuki Hayashi, Yoshihisa Katase, Hiroshi Maejima, Yukio Yamaguchi, Kazunaga Ueda
Meeting Proc. SICE-ICASE 2006
Host