山田健郎
氏名 山田 健郎（やまだ たけお）
学位 東京大学 工学博士
職位 副研究センター長（2023年4月〜）
専門 多孔質材料
学位
1995年 中央大学理工学部物理学科卒業（理学士）
1997年 東京大学大学院工学系研究科システム量子工学専攻 修士課程修了
2002年 東京大学大学院工学系研究科システム量子工学専攻 博士課程修了
略歴
| 1997-1998年 | 旭硝子株式会社 |
| 2002-2003年 | 特別研究員（産総研ポストドクター) 産業技術総合研究所 電力エネルギー研究部門エネルギー材料グループ |
| 2003-2004年 | 日本学術振興会特別研究員（学振PD) 産業技術総合研究所 電力エネルギー研究部門エネルギー材料グループ |
| 2004年 | 研究員 産業技術総合研究所 ナノカーボン研究センター |
| 2008年 | 研究員 産業技術総合研究所 ナノチューブ応用研究センター |
| 2009年10月 | 主任研究員 産業技術総合研究所 ナノチューブ応用研究センター |
| 2012年4月 | 企画主幹 ナノテクノロジー・材料・製造分野研究企画室 (兼務) ナノチューブ応用研究センター スーパーグロースＣＮＴ用途開発チーム (研究チーム付) |
| 2013年4月 | CNT用途開発チーム長 産業技術総合研究所 ナノチューブ応用研究センター |
| 2015年4月 | CNT用途チーム長 産業技術総合研究所 ナノチューブ実用化研究センター |
| 2022年4月 | ナノデバイス研究チーム長 産業技術総合研究所 ナノカーボンデバイス研究センター |
| 2023年4月 | 副研究センター長 産業技術総合研究所 ナノカーボンデバイス研究センター |
筆頭論文
17. Torsion-Sensing Material from Aligned Carbon Nanotubes Wound onto a Rod Demonstrating Wide Dynamic Range
Takeo Yamada, Yuki Yamamoto, Yuhei Hayamizu, Atsuko Sekiguchi, Hiroyuki Tanaka, Kazufumi Kobashi, Don N. Futaba, and Kenji Hata
ACS Nano, 7 (4), 3177-3182 (2013)
16. Hierarchical Three-dimensional Layer-by-Layer Assembly of Carbon Nanotube Wafers for Integrated Nanoelectronic Devices
Takeo Yamada, Natsumi Makimoto, Atsuko Sekiguchi, Yuki Yamamoto, Kazufumi Kobashi, Yuhei Hayamizu, Yoshiki Yomogida, Hiroyuki Tanaka, Hisashi Shima, Hiroyuki Akinaga, Don Futaba and Kenji Hata
Nano Letters, 12 (9), 4540-4545 (2012)
15. A stretchable carbon nanotube strain sensor for human-motion detection
Takeo Yamada, Yuhei Hayamizu, Yuki Yamamoto, Yoshiki Yomogida, Ali Izadi-Najafabadi, Don N. Futaba and Kenji Hata
Nature Nanotechnology, 6 (5), 296-301 (2011)
14. Revealing the Secret of Water-Assisted Carbon Nanotube Synthesis by Microscopic Observation of the Interaction of Water on the Catalysts
Takeo Yamada, Alan Maigne, Masako Yudasaka, Kouhei Mizuno, Don Futaba, Motoo Yumura, Sumio Iijima, Kenji Hata
Nano Letters, 8 (12), 4288-4292 (2008)
13. Size selective growth of double-walled carbon nanotubes forests from engineered iron catalysts
T. Yamada, Tatsunori Namai, Kenji Hata, Don N. Futaba, Kohei Mizuno, Jing Fan, Masako Yudasaka, Motoo Yumura, Sumio Iijima
Nature Nanotechnology vol 1 131-136 (2006)
12. A simple method for fabrication of mesoporous films using a rapid heating process
T. Yamada, HS. Zhou, I. Honma, Y. Ueno, T. Horiuchi, O. Niwa
Chem. Lett., 29 (2005) 328-329
11. Experimental and theoretical NOx, physisorption analyses of mesoporous film (SBA-15 and SBA-16) constructed surface photo voltage (SPV) sensor
T. Yamada, HS. Zhou, H. Uchida, I. Honma, and T. Katsube
J. Phys. Chem. B, 108 (2004) 13341-13346
10. A possibility of block-copolymer templated mesoporous silica films applied to surface photo voltage (SPV) type Nox gas sensor
T. Yamada, H. S. Zhou, H. Uchida, M. Tomita, Y. Ueno, Y. Katsube, and I. Honma
Studies in Surface Science and Catalysis -Nanotechnology in Mesostructured Materials, 146 (2003) 783-786
9. Platinum Surface Modification to SBA-15 by g-ray Radiation Treatment
T. Yamada, H. S. Zhou, D. Hiroishi, M. Tomita, Y. Ueno, K. Asai and I. Honma
Adv. Mater., 15 (2003) 511-513
8. An application possibility of self-ordered mesoporous silicate for surface photo voltage (SPV) type NO gas sensor (II): Self-ordered mesoporous silicate incorporated SPV device and its sensing property dependence of mesostructure
T. Yamada, HS. Zhou, H. Uchida, M. Tomita, Y. Ueno, K. Asai, I. Honma and T. Katsube
IEICE Trans. Electronics, E85-C (2002) 1304-1310
7. An application possibility of self-ordered mesoporous silicate for surface photo voltage type NO gas sensor (I): The characterization of nonionic triblock copolymer templated self-ordered mesoporous silicates and preparation their film for device application
T. Yamada, H. S. Zhou, H. Uchida, M. Tomita, Yuko Ueno, Keisuke Asai, Itaru Honma and Teruaki Katsube
IEICE Trans. Electronics, E85-C (2002) 1298-1303
6. Pore size controlled mesoporous silicate powder prepared by triblock copolymer templates
T. Yamada, H. S. Zhou, K. Asai and I. Honma
Mater. Lett., 56 (2002) 93-96
5. Application of Cubic-Like Mesoporous Silica Film to a Surface Photo Voltage Gas Sensing System
T. Yamada, H. S. Zhou, H. Uchida, W. Zhang, M. Tomita, Y. Ueno, T. Ichino, I. Honma, K. Asai and T. Katsube
Microporous and Mesoporous Materials, 54 (2002) 269-276
4. Surface photo voltage NO gas sensing properties dependent on the structure of self ordered mesoporous silicate film
T. Yamada, H. S. Zhou, H. Uchida, M. Tomita, Y. Ueno, T. Ichino, I. Honma, K. Asai, and T. Katsube
Adv. Mater., 14 (2002) 812-815
3. Size Controlled Mesoporous Silicate Thin Films using Block Copolymer as Template (I)
T. Yamada, K. Asai, K. Ishigure, A. Endo, H. S. Zhou and I. Honma
Studies in Surface Science and Catalysis, 132 (2001) 631-634
2. Size control of Block Polymer Templated Mesoporous Silicate Materials
T. Yamada, K. Asai, K. Ishigure, A. Endo, H. S. Zhou and I. Honma
Mat. Res. Soc. Symp. Proc., 628 (2000) CC6.24.1-CC6.24.6
1. Size control of oriented hexagonal mesoporous silicate thin film prepared by triblock copolymer templates
T. Yamada, K. Asai, A. Endo, H. S. Zhou and I. Honma
J. Mater. Sci. Lett., 19 (2000) 2167-2169
非筆頭論文
67. Cu/Carbon nanotube composites: research trends and outlook
Meenakshi Sundaram Rajyashree, Atsuko Sekiguchi, Mizuki Sekiya, Takeo Yamada, Kenji Hata
Royal Society Open Science, 5 (11), 180814-1-21 (2018)
66. Purifying carbon nanotube wires by vacuum annealing
Meenakshi Sundaram Rajyashree, Takeo Yamada, Kenji Hata, Atsuko Sekiguchi
Materials Today:Proceedings 5, 27316-27326 (2018)
65. The importance of CNT wire density, structural uniformity, and purity for fabricating homogeneous CNT-Cu wire composites by Cu electrodeposition
Meenakshi Sundaram Rajyashree, Takeo Yamada, Kenji Hata & Atsuko Sekiguchi
JAPANESE JOURNAL OF APPLIED PHYSICS, 57, 04FP08 (2018)
64. Controlling the structure of arborescent carbon nanotube networks for advanced rubber composites
Kazufumi Kobashi, Seisuke Ata, Takeo Yamada, Don N. Futaba, Kenji Hata
Composites Science and Technology, 163, 91-96 (2018)
63. Designing Neat and Composite Carbon Nanotube Materials by Porosimetric Characterization
Kazufumi Kobashi, Howon Yoon, Seisuke Ata, Takeo Yamada, Don N. Futaba and Kenji Hata
Nanoscale Research Letters, 12:616 (2017)
62. Electrical performance of lightweight CNT-Cu composite wires impacted by the surface and internal Cu spatial distribution
Rajyashree Sundaram, Takeo Yamada, Kenji Hata, Atsuko Sekiguchi
Materials Today Communications, 13, 119-125 (2017)
61. Low turn-on and uniform field emission from structurally engineered carbon nanotube arrays through growth on metal wire mesh substrates
Guohai Chen, Bin Zhao, Hiroe Kimura, Hiroyuki Kurachi, Naoyuki Matsumoto, Takeo Yamada, Kenji Hata, Sashiro Uemura and Don N Futaba
Materials Research Express, 4(10) (2017)
60. The limitation of electrode shape on the operational speed of a carbon nanotube based micro-supercapacitor
K. U. Laszczyk, D. N. Futaba, K. Kobashi, K. Hata, T. Yamada and A. Sekiguchi
Sustainable Energy Fuels, 1(6), 1282-1286 (2017)
59. Improvement in thermal durability of fluorinated rubber by the addition of single-walled carbon nanotubes as a thermally stable radical scavenger
Seisuke Ata, Shigeki Tomonoh, Takeo Yamada, Kenji Hata
Polymer, 119, 112-117 (2017)
58. Relationship Between Primary Structure and Hansen Solubility Parameter of Carbon Nanotubes
Seisuke Ata, Takeo Yamada, Kenji Hata
Journal of Nanoscience and Nanotechnology, 17(5), 3310-3315 (2017)
57. Highly Thermally Conductive Yet Flexible Composite of Carbon Fiber, Carbon Nanotube, and Rubber Obtained by Decreasing the Thermal Resistivity at the Interface between Carbon Fiber and Carbon Nanotube
Seisuke Ata, Chandramouli Subramaniam, Ayumi Nishizawa, Takeo Yamada, and Kenji Hata
ADVANCED ENGINEERING MATERIALS, 19(2), 1600596 (2017)
56. High Aspect Ratio Machining of Nanocarbon Materials by Reactive Ion Etching
Atsuko Sekiguchi, Don N. Futaba, Takeo Yamada, and Kenji Hata
MRS Advances, 2(1), 9-14 (2017)
55. Experimental analysis of stabilizing effects of carbon nanotubes (CNTs) on thermal oxidation of poly(ethylene glycol) CNT composites
Shogo Yamane, Seisuke Ata, Liang Chen, Hiroaki Sato, Takeo Yamada, Kenji Hata, Junji Mizukado
Chem. Phys. Lett., 670, 32-36 (2017)
54. Nano-scale, planar and multi-tiered current pathways from Carbon nanotube-Copper with high conductivity, ampacity, and stability
Chandramouli Subramaniam, Atsuko Sekiguchi, Takeo Yamada, Don N. Futaba and Kenji Hata
Nanoscale, 8 (7), 3888-3894 (2016)
53. High Electro-conductive and High Durable Rubber Using with Long Single Wall Carbon Nanotubes: Dispersion Procedure and Composite Properties
Seisuke Ata, Howon Yoon, Ayumi Nishizawa, Takaaki Mizuno, Takeo Yamada, Kenji Hata
Journal of the Japan Society of Polymer Processing, 27 (9), 388-393 (2015)
52. Robust and Soft Elastomeric Electronics Tolerant to Our Daily Lives
Atsuko Sekiguchi, Fumiaki Tanaka, Takeshi Saito, Yuki Kuwahara, Shunsuke Sakurai, Don N. Futaba, Takeo Yamada, and Kenji Hata
Nano Letters, 15, 5716-5723 (2015)
51. Lithographically Integrated Microsupercapacitors for Compact, High Performance, and Designable Energy Circuits
Karolina U. Laszczyk, Kazufumi Kobashi, Shunsuke Sakurai, Atsuko Sekiguchi, Don N. Futaba, Takeo Yamada, and Kenji Hata
Advanced Energy Materials, 5 (18), 1500741 (2015)
50. The Application of Gas Dwell Time Control for Rapid Single Wall Carbon Nanotube Forest Synthesis to Acetylene Feedstock
Naoyuki Matsumoto, Azusa Oshima, Shunsuke Sakurai, Takeo Yamada, Motoo Yumura, Kenji Hata, and Don N. Futaba
Nanomaterials 5, 1200-1210 (2015)
49. Elastomeric Thermal Interface Materials with High Through-Plane Thermal Conductivity from Carbon Fiber Fillers Vertically Aligned by Electrostatic Flocking
Kojiro Uetani, Seisuke Ata, Shigeki Tomonoh, Takeo Yamada, Motoo Yumura, and Kenji Hata
Advanced Materials, 26 (33), 5857-5862 (2014)
48. Carbon nanotube-copper exhibiting metal-like thermal conductivity and silicon-like thermal expansion for efficient cooling of electronics
Subramaniam Chandramouli, Yuzuri Yasuda, Satoshi Takeya, Seisuke Ata, Ayumi Nishizawa, Don N. Futaba, Takeo Yamada, and Kenji Hata
Nanoscale, 6, 2669-2674 (2014)
47. Controlling exfoliation in order to minimize damage during dispersion of long SWCNTs for advanced composites
Howon Yoon, Motoi Yamashita, Seisuke Ata, Don N. Futaba, Takeo Yamada, and Kenji Hata
Scientific Reports, 4, 3907 (2014)
46. Green, Scalable, Binderless Fabrication of a Single-Wall Carbon Nanotube Nonwoven Fabric Based on an Ancient Japanese Paper Process
Kazufumi Kobashi, Tatsuya Hirabayashi, Seisuke Ata, Takeo Yamada, Don Futaba, and Kenji Hata
ACS Applied Materials & Interfaces, 5 (23), 12602-12608 (2013)
45. One hundred fold increase in current carrying capacity in a carbon nanotube-copper composite
Chandramouli Subramaniam, Takeo Yamada, Kazufumi Kobashi, Atsuko Sekiguchi, Don N. Futaba, Motoo Yumura, and Kenji Hata
Nature Communications, 4, 2202 (2013)
44. Field emission from laterally aligned carbon nanotube flower arrays for low turn-on field emission
Hiroe Kimura, Bin Zhao, Don N. Futaba, Takeo Yamada, Hiroyuki Kurachi, Sashiro Uemura, and Kenji Hata
APL Materials, 1 (3), 032101- 1-5 (2013)
43. A Dispersion Strategy: Dendritic Carbon Nanotube Network Dispersion for Advanced Composites
Kazufumi Kobashi, Seisuke Ata, Takeo Yamada, Don N. Futaba, Motoo Yumura and Kenji Hata
Chemical Science, 4 (2), 727-733 (2013)
42. Molecularly Ordered Bioelectrocatalytic Composite inside a Film of Aligned Carbon Nanotubes
Syuhei Yoshino, Takeo Miyake, Takeo Yamada, Kenji Hata, and Matsuhiko Nishizawa
Advanced Energy Materials, 3 (1), 60-64 (2013)
41. Carbon Nanotube Loop Arrays for Low-Power, High Uniformity Field Emission with Lifetime over 10,000
Don N. Futaba, Hiroe Kimura, Bin Zhao, Takeo Yamada, Hiroyuki Kurachi, Sashiro Uemura, and Kenji Hata
Carbon, 50 (8), 2796-2803 (2012)
40. Role of Subsurface Diffusion and Ostwald Ripening in Catalyst Formation for SWNT Forest Growth
Shunsuke Sakurai, Hidekazu Nishino, Don N. Futaba, Satoshi Yasuda, Takeo Yamada, Alan Maigne, Yutaka Matsuo, Eiichi Nakamura, Motoo Yumura and Kenji Hata
Journal of the American Chemical Society, 134 (4), 2148-2153 (2012)
39. Gas Dwell Time Control for Rapid and Long Lifetime Growth of SWNT Fores
Satoshi Yasuda, Don N. Futaba, Takeo Yamada, Motoo Yumura and Kenji Hata
Nano Letters, 11 (9), 3617-3623 (2011)
38. Epoxy Composite Sheets with a Large Interfacial Area from a High Surface Area-Supplying Single-Walled Carbon Nanotube Scaffold Filler
Kazufumi Kobashi, Hidekazu Nishino, Takeo Yamada, Don N. Futaba, Motoo Yumura and Kenji Hata
Carbon, 49 (15), 5090-5098 (2011)
37. Macroscopic Wall Number Analysis of Single-Walled, Double-Walled, and Few-Walled Carbon Nanotubes by X-ray Diffraction
Don N. Futaba, Takeo Yamada, Kazufumi Kobashi, Motoo Yumura, and Kenji Hata
Journal of the American Chemical Society, 133, 5716-5719 (2011)
36. Self-Regulating Enzyme-Nanotube Ensemble Films and Their Application as Flexible Electrodes for Biofuel Cells
Takeo Miyake, Syuhei Yoshino, Takeo Yamada, Kenji Hata, Matsuhiko Nishizawa
Journal of the American Chemical Society, 133, 5129-5134 (2011)
35. High Power Supercapacitor Electrodes from Single-Walled Carbon Nanohorn/Nanotube Composite
Ali Izadi-Najafabadi, Takeo Yamada, Don N. Futaba, Masako Yudasaka, H. Takagi, Hiroaki Hatori, Sumio Iijima, Kenji Hata
ACS Nano, 5, 811-819 (2011)
34. Integrated CNTs thin film for MEMS mechanical sensors
Van Thanh Dau, Takeo Yamada, Dzung Viet Dao, Bui Thanh Tung, Kenji Hata and Susumu Sugiyama
Microelectronics Journal, 41, 860-864 (2010)
33. Carbon Nanotubes with Temperature Invariant Viscoelasticity from -196°C to 1000°C
Ming Xu, Don N. Futaba, Takeo Yamada, Motoo Yumura and Kenji Hata
Science, 330 (6009), 1364-1368 (2010)
32. Impact of cell-voltage on energy and power performance of supercapacitors with single-walled carbon nanotube electrodes
Ali Izadi-Najafabadi, Takeo Yamada, Don N. Futaba, Hiroaki Hatori, Sumio Iijima, Kenji Hata
Electrochemistry Communications, 12, 1678-1681 (2010)
31. Extracting the Full Potential of Single-Walled Carbon Nanotubes as Durable Supercapacitor Electrodes Operable at 4V with High Power and Energy Density
Ali Izadi-Najafabadi, Satoshi Yasuda, Kazufumi Kobashi, Takeo Yamada, Don N. Futaba, Hiroaki Hatori, Motoo Yumura, Sumio Iijima and Kenji Hata
Advanced Materials, 22 (35), E235-E241 (2010)
30. Outer-Specific Surface Area as a Gauge for Absolute Purity of Single-Walled Carbon Nanotube Forests
Don N. Futaba, Jundai Goto, Takeo Yamada, Satoshi Yasuda, Motoo Yumura, Kenji Hata
Carbon, 48, 4542-4546 (2010)
29. Integration of SWNT film into MEMS for a micro-thermoelectric device
Van Thanh Dau, Dzung Viet Dao, Takeo Yamada, Bui Thanh Tung, Kenji Hata and Susumu Sugiyama
Smart Materials and Structures, 19, 075003 (2010)
28. Compact and light supercapacitors from a surface-only solid by opened carbon nanotubes with 2200 m2/g
Tatsuki Hiraoka, Ali Izadi-Najafabadi, Takeo Yamada, Don N. Futaba, Satoshi Yasuda, Osamu Tanaike, Hiroaki Hatori, Motoo Yumura, Sumio Iijima and Kenji Hata
Advanced Functional Materials, 20, (3), 422-428 (2010)
27. Improved and Large Area Singled-Walled Carbon Nanotube Forest Growth by Controlling the Gas Flow Direction
Satoshi Yasuda, Don N. Futaba, Takeo Yamada, Junichi Satou, Akiyoshi Shibuya, Hirokazu Takai, Kouhei Arakawa, Motoo Yumura, and Kenji Hata
ACN Nano, ACS Nano, Vol. 3, No. 12, 4164-4170 (2009)
26. General Rules Governing the Highly Efficient Growth of Carbon Nanotubes
Don N. Futaba, Jundai Goto, Satoshi Yasuda, Takeo Yamada, Motoo Yumura, and Kenji Hata
Advanced Materials, Vol. 21, 4811-4815 (2009)
25. A Background Level of Oxygen-Containing Aromatics for Synthetic Control of Carbon Nanotube Structure
Don N. Futaba, Jundai Goto, Satoshi Yasuda, Takeo Yamada, Motoo Yumura, and Kenji Hata
Journal of the American Chemical Society, 131, 15992–15993 (2009)
24. Dual Porosity Single-Walled Carbon Nanotube Material
Don N. Futaba, Koji Miyake, Kazuhiro Murata, Yuhei Hayamizu, Takeo Yamada, Shinya
Sasaki, Motoo Yumura, and Kenji Hata
23. Mechanical Properties of Beams from Self-Assembled Closely Packed and Aligned Single-Walled Carbon Nanotubes
Yuhei Hayamizu, Robert C. Davis, Takeo Yamada, Don N. Futaba, Satoshi Yasuda, Motoo Yumura, and Kenji Hata
Physical Review Letters, 102, 175505 (2009)
22. Existence and Kinetics of Graphitic Carbonaceous Impurities in Carbon Nanotube Forests to Assess the Absolute Purity
Satoshi Yasuda, Tatsuki Hiraoka, Don N. Futaba, Takeo Yamada, Motoo Yumura, and Kenji Hata
Nano Letters, 9 (2), 769-773 (2009)
21. Exploring Advantages of Diverse Carbon Nanotube Forests with Tailored Structures Synthesized by Super-Growth from Engineered Catalysts
Bin Zhao, Don N. Futaba, Satoshi Yasuda, Megumi Akoshima, Takeo Yamada, Kenji Hata
ACS Nano, 3 (1), 108-114 (2009)
20. Integrated three-dimensional microelectromechanical devices from processable carbon nanotube wafers
Y. Hayamizu, T. Yamada, K. Mizuno, R. C. Davis, D. N. Futaba, M. Yumura, K. Hata
Nature Nanotechnology. 3, 289-294 (2008)
19. Water-Assisted Highly Efficient Synthesis of Single-Walled Carbon Nanotubes Forests from Colloidal Nanoparticle Catalysts
H. Nishino, S. Yasuda, T. Namai, D. N. Futaba, T. Yamada, M. Yumura, S. Iijima, K. Hata
Journal of Physical Chemistry C. 111, 17961-17965 (2007)
18. Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes
D.N. Futaba, Kenji Hata,Takeo Yamada, Tatsuki Hiraoka, Yuhei Hayamizu, Yozo Kakudate, Osamu Tanaike, Hiroaki Hatori, Motoo Yumura and Sumio Iijima
Nature Material. 5, 987-994,(2006)
17. Synthesis of Single-and Double- Walled carbon Nanotube Forests on Conducting Metal Foils
Tatsuki Hiraoka, T. Yamada, Kenji Hata, Don N.Futaba, Hiroyuki Kurachi, Sashirou Uemura, Motoo Yumura, Sumio Iijima
J.Am. Chem. Soc.; 128; 13338-13339.(2006)
16. 84% Catalyst Activity of Water Assisted Growth, Single Walled Carbon Nanotube Forest Characterization by a Statistical and Macroscopic Approach
Don N.Futaba, Kenji Hata, Tatsunori Namai, T. Yamada, Kohei Mizuno, Yuhei Hayamizu, Motoo Yumura, and Sumio Iijima
J.Phs. Chem. B, 110,8035-8038(2006)
15. Kinetics of water-assisted single-walled carbon nanotubes synthesis revealed by a time-evolution analysis
D. N. Futaba, K. Hata, T. Yamada, K. Mizuno, M. Yumura, and S. Iijima
Phys. Rev. Lett., 95 (2005) 056104
14. High benzene selectivity of mesoporous silicate for BTX gas sensing microfluidic devices
Y. Ueno, A. Tate, O. Niwa, HS. Zhou, T. Yamada, and I. Honma
Analytical and Bioanalytical Chemistry, 382 (2005) 804-809
13. Effect of the calcinations temperature of self-ordered mesoporous silicate on its adsorption characteristics for aromatic hydrocarbons
Y. Ueno, T. Horiuchu, A. Tate, O. Niwa, HS. Zhou, T. Yamada, and I. Honma
New Journal of Chemistry, 29 (2005) 504-508
12. Effect of tin addition on mesoporous silica thin film and its application for surface photovoltage NO2 ga sensor
B. Yuliarto, HS. Zhou, T. Yamada, I. Honma, Y. Katsumura, and M. Ichihara
Anal. Chem., 76 (2004) 6719-6726
11. High benzene selectivity of uniform sub-nanometer pores of self-ordered mesoporous silicate
Y. Ueno, A. Tate, O. Niwa, HS. Zhou, T. Yamada, and I. Honma
Chem. Comm., (2004) 746-747
10. Improvement of on-site microfluidic benzene, toluene, zylene (BTX) gas sensor loaded with nanostructured mesoporous silicate
Y. Ueno, T. Horiuchi, O. Niwa, HS. Zhou, T. Yamada, and I. Honma
Sensors and Materials, 15 (2003) 393-402
9. Synthesis of Self-Ordered Tin-modified MCM-41 Films for Enhancement of NO2 Gas Surface Photo Voltage Sensor Properties
B. Yuliarto, H. S. Zhou, T. Yamada, I. Honma, and K. Asai
ChemPhysChem, 5 (2004) 261-265
8. Portable automatic BTX measurement system with microfluidic device using mesoporous silicate adsorbent with nano-sized pores
Y. Ueno, T. Horiuchi, O. Niwa, H. S. Zhou, T. Yamada, and I. Honma
Sensors and Actuators B, 95 (2003)
7. Preparation of tin modified silica mesoporous film
Preparation of tin modified silica mesoporous film
Studies in Surface Science and Catalysis -Nanotechnology in Mesostructured Materials, 146 (2003) 81-84
6. The SPV NO2 Gas Sensor Fabricated by Mesoporous Tin Oxide Film
B. Yuliarto, H. S. Zhou, T. Yamada, I. Honma, and K. Asai
Chem. Lett., 32 (2003) 510-511
5. NO and NO2 gas sensors based on surface photoboltage system fabricated by self-ordered Mesoporous silicate film
HS. Zhou, T. Yamada, K. Asai, I. Honma, H. Uchida, and T. Katsube
Studies in Surface Science and Catalysis -Nanoporous Materials III respectives in analytical philosophy, 141 (2002) 623-630
4. Separate Detection of BTX Mixture Gas by a Microfluidic Device using a Function of Nanosized Pores of Mesoporous Silica Adsorbent
Y. Ueno, T. Horiuchi, M. Tomita, O. Niwa, HS. Zhou, T. Yamada and I. Honma
Anal. Chem., 74 (2002) 5257-5262
3. NO gas sensor based on surface photovoltage system is fabricated by self-ordered hexagonal mesoporous silicate film
H. S. Zhou, T. Yamada, K. Asai, I. Honma, H.Uchida and T. Katsube
Jpn. J. Appl. Phys. 40 (2001) 7098-7102
2. Diluted Magnetic Semiconductor Nanoparticles Fabricated by L. B. Technique
T. Yamaki, T. Yamada, K. Asai and K. Ishigure
Thin Solid Films, 327-329 (1998) 586-590
1. Ion Irradiation Effect on Diluted Magnetic Semiconductor Fine Particles Incorporated into L. B. Films
T. Yamaki, T. Yamada, K. Asai, K. Ishigure and H. Shibata
Thin Solid Films, 327-329 (1998) 581-585
論文（和文）
2. スーパーグロース法による単層・二層CNT合成
山田健郎、畠賢治
触媒、第51巻1号、2-7 (2009)
1. 均一細孔と規則構造を有するメソポーラス材料のSurface Photo Voltage (SPV) 型NO, NO2ガスセンサーへの応用
山田健郎、周豪慎、本間格、富田雅人、上野祐子、内田秀和、勝部昭明
電気学会論文誌E（センサ・マイクロマシン準部門誌）、123-E (2003) 118-123
論文（査読なし)
4. 陽電子寿命測定法を用いたメソポーラスシリカMCM-41とSBA-15の構造解析
三宅範夫、越水正典、浅井圭介、山田健郎、周豪慎、本間格、岩井岳夫、柴田裕実、伊藤泰男
京都大学原子炉実験所レポート(KURRI-KR)（「陽電子ビームの形成と理工学への応用」専門研究会報告（平成14年度）） KURRI-KR89、86-93
3. Ordered mesoporous silicate materials from a template of triblock copolymer (I): Size control and characterization of powder
T. Yamada, K. Asai, H. S. Zhou and I. Honma
Key Engineering Materials, 206-213 (2002) 1953-1956
2. Ordered mesoporous silicate materials from a template of triblock copolymer (II): Synthesis of film and application for gas sensor
H. S. Zhou, T. Yamada, K. Asai, I. Honma, H. Uchida and T. Katsube
Key Engineering Materials, 206-213 (2002) 1985-1988
1. The application of block copolymer templated mesoporous silicate film for SPV gas sensor
T. Yamada, H. S. Zhou, H. Uchida, W. Zhang, M. Tomita, Y. Ueno, T. Ichino, I. Honma, K. Asai and T. Katsube
Chemical Sensors, 17 Supplement B (2001) 300-302
著書・刊行物
2. スーパーグロース法を利用した二層カーボンナノチューブの高純度合成
山田健郎
New Diamond. 23, 28頁～29頁(2007)
1. ナノチューブの合成
山田健郎
炭素材料の新展開 学振117委員会 六十周年記念出版電気学会論文誌, 19頁～23頁 (2007)
国内特許
2. ガス吸着下における陽電子消滅用を用いた細孔サイズの評価方法とその評価装置
番号 ：特願2003-34417
出願日：平成15年2月12日
発明者：周豪慎、本間格、山田健郎、浅井圭介、越水正典、三宅範夫
1. 放射線を用いた多孔質のコート法
番号 ：特願2003-068213
出願日：平成15年3月13日
発明者：周豪慎、本間格、山田健郎
受賞・表彰
2002年 International Conference on Colloid and Surface Science (ICCSS)
Best Poster Award (An Award Winner)