国立研究開発法人 産業技術総合研究所
   Sensing System Research Center
産総研  > 組織 >  センシングシステム研究センター > 研究チーム

研究チーム概要 センサ基盤技術研究チーム



  • 福田 伸子 (研究チーム長)
  • 日下 靖之 WEBサイト
  • 末森 浩司
  • Ivan Turkevych
  • 有本 英伸
  • 二又 政之




  • フレキシブルデバイス材料技術
  • 熱電変換材料技術
  • 表面界面制御技術
  • 高精細積層デバイス印刷技術
  • 低温焼結技術
  • 溶液プロセス評価技術
  • デバイス評価技術
  • 各種分光計測技術
  • 生体光学計測技術
  • 材料分析技術





1. "Penetration of a Mg: Ag alloy electrode thermal deposited on an organic thin film", K. Suemori*, Nobuki Ibaraki, Jpn. J. Appl. Phys, 2019, 58, 038006.
2. “Strategic advantages of reactive polyiodide melts for scalable perovskite photovoltaics”, I. Turkevych*, S. Kazaoui, N. A. Belich, A. Y. Grishko, S. A. Fateev, A. A. Petrov, T. Urano, S. Aramaki, S. Kosar, M. Kondo, E. A. Goodilin, M. Graetzel, A. B. Tarasov., Nature Nanotechnology 2019, 14, 57-63.
3. "Visible surface diffusion of gold nanostructures on a paper at room temperature through localized surface plasmon resonance", N. Fukuda*, S. Manaka, MRS Adv. 2019, doi: 10.1557/adv.2019.108
4. “Reverse Offset Printing of Semidried Metal Acetylacetonate Layers and Its Application to a Solution-Processed IGZO TFT Fabrication”, Y. Kusaka*, N. Shirakawa, S. Ogura, J. Leppaniemi, A. Sneck, A. Alastalo, H. Ushijima, N. Fukuda, ACS Applied Materials & Interfaces 2018, 10, 24339.
5. “Electrical response of culture media during bacterial growth on a paper-based device”, T. Srimongkon, M. Buerkle, A. Nakamura, T. Enomae, H. Ushijima, N. Fukuda*, Jpn. J. Appl. Phys., 2017, 56, 05EC04.
6. "Spectroscopic analysis of autofluorescence distribution in digestive organ for unstained metabolism-based tumor detection",H. Arimoto*, A. Iwata, K. Kagawa, Y. Sanomura, S. Yoshida, S. Kawahito, S. Tanaka, Imaging, Manipulation, and Analysis of Biomolecules, Cells, and Tissues XV, 10068-, pp.12.2250776-
7. “Flexible InGaZnO TFT devices obtained via humid-UV irradiation with an aqueous-fluoroalcoholic precursor”, S. Ogura, C. Heajeong, S. Uemura, H. Ushijima, N. Fukuda*, Flex. Print. Electron, 2016, 1, 045001.
8. "The Secret of Cool Plasma Sintering for Low-temperature Bulk Formation from Copper Nanoparticles" N. Shirakawa*, 2016 International Conference on Electronics Packaging (ICEP), p.133, IEEE Xplore, doi: 10.1109/ICEP.2016.7486797.
9. “High Resolution Paterning of Silver Conductive Lines by Adhesion Contrast Planography”, Y. Kusaka*, M. Koutake, H. Ushijima, J. Micromech. Microeng. 2015, 25 095002.
10. "Imaging wavelength and light penetration depth for water content distribution measurement of skin",H. Arimoto*, M. Egawa,Skin Res. Technol. 2015, 21-1, 94-100.
11. “Overlay of semi-dried functional layers in offset printing for rapid and high-precision fabrication of flexible TFTs”, Y. Kusaka*, K. Sugihara, M. Koutake, H. Ushijima,. Micromech. Microeng. 2014, 24, 035020.
12. “In-Ga-Zn oxide nanoparticles acting as oxide semiconductor material synthesized via coprecipitation-based method”, N. Fukuda*, Y. Watanabe, S. Uemura, Y. Yoshida, T. Nakamura, and H. Ushijima, J. Mater. Chem. C, 2014, 2, 2448.
13. "Flexible and lightweight thermoelectric generators composed of carbon nanotube–polystyrene composites printed on film substrate", K. Suemori*, S. Hoshino, T. Kamata, Appl. Phys. Lett. 2013, 103, 153902.
14. 特許第6411254号「平刷版を用いたパターン膜形成方法、形成装置」
15. 特許第6404068号「酸化物前駆体材料」
16. 特許第5713472号「熱電変換材料及び該材料を用いたフレキシブル熱電変換素子」
17. 特許第4296270号「ヘリウム3冷凍機利用磁化測定装置」
18. WO/2016/024586「金属材料の処理装置」
19. 特願2018-095883「光学的非侵襲的血液成分分析方法」
20. 特願2017-206418「蓄熱材の熱モニタリング方法及びこのための蓄熱材収容容器」