国際標準化活動
産総研が中心となって開発したISO規格
- ISO/TS 10867
- Nanotechnologies -- Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- ISO 21384-3
- Unmanned aircraft systems ? Part 3: Operational procedures
- ISO 21675:2019
- Water quality -- Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water -- Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) (水中のポリフルオロアルキル化合物(PFAS)の測定―固相抽出方法と液体クロマトグラフタンデム質量分析計(LC-MS-MS)を用いた試験方法)
- ISO 24550:2019
- Ergonomics -- Accessible design -- Indicator lights on consumer products(高齢者・障害者配慮設計指針-アクセシブルデザイン-パート1: 消費生活用製品の報知光)
- ISO 24551:2019
- Ergonomics -- Accessible design -- Spoken instructions of consumer products(高齢者・障害者配慮設計指針-アクセシブルデザイン-パート2: 消費生活用製品の音声案内)
- ISO 12039:2019
- Stationary source emissions ? Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas ? Performance characteristics of automated measuring systems
- ISO 24509:2019
- Ergonomics -- Accessible design -- A method for estimating minimum legible font size for people at any age
- ISO/IEC 29192-6:2019
- Information technology -- Security techniques -- Lightweight cryptography -- Part 6: Message authentication codes (MACs) (情報技術ーセキュリティ技術ー軽量暗号ーパート6: メッセージ認証子(MAC))
- ISO 21268-3:2019
- Soil quality -- Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials -- Part 3: Up-flow percolation test (地盤環境 土および地盤材料の溶出特性評価 Part3 上向流カラム通水試験)
- ISO 20264:2019
- Stationary source emissions ? Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
- ISO 20140-1:2019
- Automation systems and integration ? Evaluating energy efficiency and other factors of manufacturing systems that influence the environment ? Part 1: Overview and general principles
- ISO/TS 11251:2019
- Nanotechnologies -- Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry (ナノテクノロジ ―発生気体分析/ガスクロマトグラフ質量分析法を用いる単一壁カーボンナノチューブ試料の揮発性成分のキャラクタリゼーション)
- ISO 22015:2019
- Packaging・--・Accessible design handling and manipulation (包装―アクセシブルデザインー操作性)
- ISO 21859:2019
- Fine ceramics (advanced ceramics, advanced technical ceramics) -Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment. (ファインセラミックス-半導体製造装置部材用プラズマ耐食性の評価手法)
- ISO 24508:2019
- Ergonomics -- Accessible design -- Guidelines for designing tactile symbols and characters (触知図形の基本設計方法)
- ISO 21618:2019
- Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method (モノリシックセラミックスの室温での圧子圧入(IF)法による破壊抵抗試験方法)
- ISO 27501:2019
- The human-centred organization -- Guidance for managers
- ISO 20146
- Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges (真空技術ー真空計ー静電容量型隔膜真空計の仕様、校正及び校正不確かさの表記方法)
- ISO/TS 16195:2018
- Nanotechnologies -- Specification for developing representative test materials consisting of nano-objects in dry powder form (ナノテクノロジ-乾燥粉末状のナノ物質で構成された代表的試験サンプルの作成の手引)
- ISO/TR 21959-1:2018
- Road vehicles -- Human performance and state in the context of automated driving -- Part 1: Common underlying concepts
- ISO 20480-2:2018
- Fine bubble technology -- General principles for usage and measurement of fine bubbles -- Part 2: Categorization of the attributes of fine bubbles (ファインバブルの使用と計測に関する一般原則- 第2部:一般原則))
- ISO 9060:2018
- Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
- ISO 16063-44:2018
- Methods for the calibration of vibration and shock transducers, Calibration of hand held accelerometer calibrator (振動及び衝撃トランスデューサの校正方法 - 第44部 : 手持ち振動校正装置の校正法)
- ISO 17168-1:2018
- Fine ceramics (advanced ceramics, advanced technical ceramics) ?Test method for air purification performance of semiconducting photocatalytic materials under indoor lighting environment ? Part 1: Removal of nitric oxide
- ISO 17168-2:2018
- Fine ceramics (advanced ceramics, advanced technical ceramics) ?Test method for air purification performance of semiconducting photocatalytic materials under indoor lighting environment ? Part 2: Removal of acetaldehyde
- ISO 17168-3:2018
- Fine ceramics (advanced ceramics, advanced technical ceramics) ?Test method for air purification performance of semiconducting photocatalytic materials under indoor lighting environment ? Part 3: Removal of toluene
- ISO 17168-4:2018
- Fine ceramics (advanced ceramics, advanced technical ceramics) ?Test method for air purification performance of semiconducting photocatalytic materials under indoor lighting environment ? Part 4: Removal of formaldehyde
- ISO 17168-5:2018
- Fine ceramics (advanced ceramics, advanced technical ceramics) ?Test method for air purification performance of semiconducting photocatalytic materials under indoor lighting environment ? Part 5: Removal of methyl mercaptan
- ISO 21113:2018
- Fine ceramics (advanced ceramics, advanced technical ceramics) -Test method for fracture toughness of monolithic ceramic thin plates at room temperature (モノリシックセラミックス薄板の室温での破壊じん性試験方法)
- ISO/TS 20177:2018
- Vacuum technology -- Vacuum gauges -- Procedures to measure and report outgassing rates
- ISO 10927:2018
- Plastics -- Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
- ISO/TS 21362:2018
- Nanotechnologies -- Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ナノテクノロジー-流動場分離法によるナノ物体の特性評価手法)
- ISO 21501-4:2018
- Determination of particle size distribution - Single particle light interaction methods -- Part 4: Light scattering airborne particle counter for clean spaces (光散乱式粒子計数器の校正方法及び検証方法)
- ISO/TS 20175:2018
- Vacuum technology -- Vacuum gauges -- Characterization of quadrupole mass spectrometers for partial pressure measurement
- ISO 20463:2018
- Rubber and rubber products ? Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials (ゴム及びゴム製品-バイオベース、非バイオベース燃焼熱と二酸化炭素発生量の求め方)
産総研が中心となって開発したIEC規格
- IEC 60747-19-1:2019 ED1
- Semiconductor devices ? Part 19-1: Smart sensors ? Control scheme of smart sensors
- IEC 61169-64:2019 ED1
- Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 ? (type 0,8)
- IEC 61169-24:2019 ED3
- Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)
- IEC 61563 ED2
- Radiation protection instrumentation - Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs (放射線防護計装-食品中のガンマ線放射核種の放射能濃度を計測する装置)
- IEC 80601-2-77:2019
- Medical electrical equipment -- Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment (医用電気機器?第2-77部:手術ロボットの基礎安全及び基本性能に関する個別要求事項)
- IEC 62899-204:2019 ED1
- Printed electronics - Part 204: Materials - Insulator ink - Measurement methods of properties of insulator inks and printed insulating layers (プリンテッドエレクトロニクス-材料-第204部:絶縁性インク)
- IEC TS 62998-1:2019 ED1
- Safety of machinery - Safety-related sensors used for the protection of persons
- IEC 63068-2:2019
- Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices - Part 1: Classification of defects(半導体素子-電源デバイス用の炭化ケイ素ホモエピタキシャルウエハーの欠陥の非破壊認識基準-第1部:欠陥の分類)
- IEC 63068-1:2019
- Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices - Part 2: Test method for defects using optical inspection(半導体素子-電源デバイス用の炭化ケイ素ホモエピタキシャルウエハーの欠陥の非破壊認識基準-第2部:光学検査による欠陥の試験方法)
- IEC 62899-201:2016+AMD1:2018
- Printed electronics - Part 201: Materials - Substrates (プリンテッドエレクトロニクス-材料-紙基材(追補))
- IEC 62899-403-1:2018 ED1
- Printed electronics - Part 403-1: Printability - Requirements for reproducibility - Basic patterns for evaluation of printing machine (プリンテッドエレクトロニクス-印刷性-評価ベーシックパターン)
- IEC 62853:2018
- Open Systems Dependability (開放系のディペンダビリティ)
- IEC 62899-303-1:2018
- Printed electronics - Part 303-1: Equipment - Roll-to-roll printing - Mechanical dimensions (プリンテッドエレクトロニクス-装置-第303部-1:シートサイズ(幅))
- IEC 60601-2-76:2018
- Medical electrical equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment (医用電気機器-第2-76部: イオンガス凝固装置の基礎安全及び基本性能の特定要求事項)
産総研が中心となって開発したISO/IEC規格
- ISO/IEC 20085-1:2019
- Information technology -- Security techniques -- Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules -- Part 1: Test tools and techniques (暗号モジュールの非侵襲攻撃防止技術のテストに使用されるテストツールキャリブレーション手法とテストツール要件 --第一部:テストツールと技術)
- ISO/IEC 24761:2019
- Information technology -- Security techniques -- Authentication context for biometrics (バイオメトリクスのための認証コンテキスト)
- ISO/IEC 20546:2019
- Information technology ? Big data ? Overview and vocabulary
- ISO/IEC 18520:2019
- Information technology -- Computer graphics, image processing and environmental data representation -- Benchmarking of vison-based spatial registration and tracking methods for Mixed and Augmented Reality (MAR) (複合現実感・拡張現実感(MAR)のためのビジョンに基づく位置合わせ及び追跡手法のベンチマーキング)
- ISO/IEC 20071-23:2018
- Information technology -- User interface component accessibility -- Part 23: Guidance on the visual presentation of audio information (including captions and subtitles) (字幕等の音声情報の視覚表現に関するガイドライン)
連絡先
国立研究開発法人 産業技術総合研究所 イノベーション推進本部 標準化推進センター
〒305-8560 茨城県つくば市梅園1-1-1 つくば本部・情報技術共同研究棟8階
標準化推進センター
電話:029-862-6234 FAX:029-862-6222
Eメール:M-SPCenter-ml*aist.go.jp(*を@に変更して送信下さい。)